GP CLINICAL EDUCATION

Fluorescein Pattern Identification Guide - 2

Without yellow filter
Pattern observed without the use of yellow filter over observation system
 

With yellow filter
Identical pattern with the addition of yellow filter; notice greater fluorescence
 

Making Lens Design Changes

Fitting Pearls

Go to Page 3

 

GP Lens Design Database - Online Symposium Schedule
 
Newsletter Sign-up - Order Educational Materials
 
Contact GPLI - Site Map - Home

Questions about fitting GP lenses? Send an e-mail to our panel of experts.

Copyright ©1999–2008 Contact Lens Manufacturers Association.
All rights reserved.
This page was last updated Thursday, April 24, 2008.
 
Printing Note: If you're printing pages from this website and find that the right side is cut off, try this: With older printers, you could choose the "landscape" (horizontal) setting rather than the "portrait" (vertical) setting when printing. But most newer printers let you scale down web pages before you print. For example, if you have an HP laser printer, when you choose "Print" from the menu, you can then choose "Preferences," where under the "Effects" tab you can change the 100% setting to, say, 95%. You may also see a "ZoomSmart" feature that lets you choose "scale to fit."