GPLI logo
Search the GP lens database
Contact Us
Site Map
Site Search

GP CLINICAL EDUCATION: GP LENS MANAGEMENT GUIDE - PAGE 1

Table of Contents

Purpose of This Guide ... introduction
A word from Edward S. Bennett, OD, MSEd, Executive Director, RGP Lens Institute

Spherical GP Fitting and Problem-Solving ... page 2
Basic advice, with fluorescein pattern evaluation, fitting pearls, and fitting tip checklist

Special Design Fitting and Problem-Solving
Fitting special-design lenses such as bifocals, bitorics and keratoconic lenses does not have to be particularly complicated. Follow these fitting and problem-solving guidelines and it is likely success will be achieved.

  • Bifocals ... page 3
    Fitting pearls; how to obtain "Bifocal Fitting and Troubleshooting Video"
     
  • Aspheric Multifocals ... page 4
    Fitting and problem-solving; what makes a good candidate
     
  • Translating Bifocals ... page 5
    Criteria for good candidates; what to do if blur or excessive rotation, or if blink brings bifocal too high
     
  • Torics ... page 6
    Fitting highly astigmatic patients; bitoric lens fit factor chart; Mandell-Moore Bitoric Lens Guide; how to order "Advanced GP Fitting Video"
     
  • Diagnostic Toric Fitting ... page 7
    Using a diagnostic fitting set
     
  • Keratoconus ... page 8
    Photos of three-point touch, apical clearance, apical bearing; fitting pearls and problem-solving

General Problem-Solving ... page 9, page 10
Symptoms, causes, diagnosis, and management of problems such as flexure, decentration, corneal dessication, poor wettability, and more

 

GP Lens Design Database - Online Symposium Schedule
 
Newsletter Sign-up - Order Educational Materials
 
Contact GPLI - Site Map - Home

Questions about fitting GP lenses? Send an e-mail to our panel of experts.

Copyright ©1999–2010 Contact Lens Manufacturers Association.
All rights reserved.
This page was last updated Wednesday, March 03, 2010.
 
Printing Note: If you're printing pages from this website and find that the right side is cut off, try this: With older printers, you could choose the "landscape" (horizontal) setting rather than the "portrait" (vertical) setting when printing. But most newer printers let you scale down web pages before you print. For example, if you have an HP laser printer, when you choose "Print" from the menu, you can then choose "Preferences," where under the "Effects" tab you can change the 100% setting to, say, 95%. You may also see a "ZoomSmart" feature that lets you choose "scale to fit."